|
|
|
|
|
As we have continuously pushed the boundaries on the Air Driven Picket Post Driver, we have also developed some of the best solutions in the world for pulling your posts out of the ground with our range of Universal Pullers.
|
Universal Puller - Nip Roller Jaws
- Specifically developed to pull posts out straight for reuse
- Pulls out any post with an edge for example all kinds of "Y", "T", roadside reflector, vineyard and trellising posts
- Most post are extracted with 1-2 tonnes which can be applied with the weight of one person
- You can apply up to 3 tonnes of pull to a post with two people
- The nip roller jaws are designed to grab the post - the harder you pull, the harder they grab
- The nip rollers can be index to use in 8 different positions extending the life of the tool dramatically
- The nip rollers and pins are all made out of high tensile steel and heat treated
- The nip roller jaws can grab from 1mm through to 8mm thick steel in the standard arrangement
- Specialised backing plates are available to extend the grab of the nip rollers to 30mm through to 50mm thick steel
- See the Universal Puller in action
|
Universal Puller - 2 - 4" Pipe Puller
- The Universal Puller's nip rollers jaws can be interchanged with jaws for pipe up to 4" diameter
- Most post are extracted with 1-2 tonnes which can be applied with the weight of one person
- You can apply up to 3 tonnes of pull to a post with two people
|
Universal Pipe Puller
- Can be adjusted to remove 2" to 6" Gal round or square steel pipe and timber posts
- It has dual grip rollers to allow for a larger surface area on timber posts
- The pivoting arm and cheater arm are both reinforced for additional weight to be applied
- The nip rollers are adjusted along a toothed backing plate marked with sizes from 2" to 6"
|
Post Grab
- Utilising the nip roller arrangement that was developed for the Universal Puller
- Attaches to a bobcat or tractor or crane with a winch and grabs any post with an edge like "Y" or "T" posts
- Has the force of a 2 tonne of lift
- Pulls posts out straight ready to be reused.
- Grab the post in one second and release in one second
- See the Post Grab in action
|
Tractor Pull
- THIS ITEM HAS BEED DISCONTIUED AND REPLACED WITH THE POST GRAB
- This device can be used in conjunction with your Bobcat, tractor or backhoe to remove posts while pulling them out straight
- Totally dedicated to "Y" post
- The blade can be used to accommodate Chinese or local manufacture post
- Short length of chain is used to attach the Tractor Pull to your bobcat, tractor or backhoe
- Any implement that can apply at least 2 tonnes of vertical lift can be used in conjunction with this product
|
